<< Click to Display Table of Contents >> Navigation:  OPUS devices update manual > Additional information > Connecting to the serial console

You can connect to the serial console of the device to change the boot logo, read debug and error messages and copy files and folders.

You need to connect your computer to the RS232 interface of the device, either directly with an RS232 cable, if your computer has the according connector, or with a RS232 <-> USB cable.

You can use any shell program, such as HyperTerminal (only up to Windows XP), PuTTY or TeraTerm VT (both free and open source).

These are the settings you need to make in your software:

 

 

The COM-Port can differ depending on your system.

 

If you start up the device with the console connected, you will see a lot of startup messages. If you connect while the device is running, you might not get any messages at first. Just press enter to get the login dialog:

 

 

Here are the login parameters:

 

login name: root

 

password:

for A3 -> opusa3

for A6 -> opusa6

for A8 -> egspro

for A6 G2 -> egspro

for B3/B4/B6 -> egscore

for B2 -> opus-b2

 

After logging in you will see a screen similar to this (it differs from device to device):

 

 

Now you’re logged into the Linux system on the device and you can execute commands.